PCF857

PCF8574 is an 8-bit quasi-bidirectional I/O expander controlled via the I2C serial bus. It expands GPIO resources for microcontrollers, widely used for LED driving, keypad matrix scanning, relay control and display interface in consumer and industrial electronics.

PCF8574 is a popular I2C-bus controlled 8-bit I/O expander manufactured by NXP Semiconductors. It features 8 quasi-bidirectional general-purpose I/O pins, which can be configured as either input or output without dedicated direction control registers. Communication with host MCU is realized through the 2-wire I2C serial interface, greatly reducing the number of required control lines and simplifying PCB wiring.
Three hardware address pins are available, allowing up to 8 individual PCF8574 devices to be connected on the same I2C bus, supporting multi-chip expansion designs. The device has strong sink current capability so it can directly drive LEDs, indicator lamps and small signal relays. It operates within a wide supply voltage range of 2.5 V to 6.0 V, compatible with both 3.3 V and 5 V microcontroller systems. Low quiescent current consumption makes it suitable for battery-powered portable products.
An active-low interrupt output pin is integrated to notify the host controller when the input port status changes, eliminating continuous polling and saving system power. The operating temperature range is −40°C to +85°C for commercial and industrial applications.
Typical applications include microcontroller GPIO expansion, LED array control, matrix keypad scanning, LCD/OLED peripheral interfaces, relay driver modules, smart home control boards, IoT sensor nodes and consumer electronic products. Cross-reference compatible parts include PCF8574A and PCA8574.

Reviews

There are no reviews yet.

Be the first to review “PCF857”

Your email address will not be published. Required fields are marked *